PEAK LIRS Series 3 with C-Clamp


Delivery 5-7 business days

PEAK’s Large Iron Retention System (LIRS) is aimed at solving the problems faced when trying to tie on hooks with large wire diameters and long shanks, which often requires the use of heavy threads. The PRVLIRS hardened and tempered tool steel anvil/drawbar combination accepts hook wires up to .095″ in diameter. 

The PRVLIRS-C1 is equipped with PEAK’s C-Clamp. The clamp is designed for the 3/8″ vise riser shaft of PEAK’s PRV series products and also allows for the use of PEAK’s 3/8″ accessory shaft. The C-Clamp has rabbeted jaws that can be reversed for maximum table thickness adjustment. The jaws ride on parallel guide rods and do not rotate when adjusted so they won’t mark your table or “walk” when you tighten the clamp. Wrench for brass tipped set screw used to lock the vise riser shaft in place is included.

PRVLIRS = up to 0.095 Wire

  • Won BEST OF SHOW In July, 2015, at the annual IFTD Show.
  • Utilizes a drawbar to capture bend of the hook into tapered groove of LIRS nest, rather than clamping hook between two parallel surfaces used by conventional vices.
  • Angle of vise head is adjustable so that hooks may be set up in horizontal position while you tie..
  • LIRS (Large Iron Retention System)
  • PRVLIRS is compatible with PEAK Rotary Vices or any standard base with 3/8" post but is NOT compatible with JS1 and JS2 models
  • Fast, easy, positive adjustments.
  • Drawbar and anvil with taped groove is easy to use.
  • Durable powder coated Pedestal Base.
  • Use with Large Pedestal Base for maximum stability or Large C-Clamp
  • Lifetime warranty against defects in material or workmanship


$50 Off any Rod and Reel Purchase

*Minimum purchase of $569